CKM0303 – CEN KAOS PUMA RALLY1 REAR WHEEL HUB CARRIERS – LEFT / RIGHT – CNC ALUMINUM RED

CKM0303 – KAOS RALLY 1 PUMA REAR WHEEL HUB CARRIERS

The CEN Racing CKM0303 KAOS Rear Wheel Hub Carriers are a left/right rear hub-carrier set made from CNC-machined aluminium for the CEN M-Sport Puma Rally 1 platform. CEN identifies this part as a KAOS upgrade and lists it specifically for the rear suspension/hub position.

CONFIRMED PRODUCT DETAILS

• Manufacturer: CEN Racing
• Product line: KAOS
• Part number / SKU: CKM0303
• Product type: Rear wheel hub carriers
• Position: Rear
• Configuration: Left and right (L/R) set
• Construction: CNC aluminium
• Finish / color: Red
• Application: CEN M-Sport Puma Rally 1

FUNCTION

Rear hub carriers support the rear wheel-hub/bearing assembly and form an important connection point between the wheel end and the suspension. Because this component locates the hub relative to the suspension geometry, correct fit and free bearing/hub movement are essential during assembly.

KAOS CNC ALUMINIUM CONSTRUCTION

CEN identifies CKM0303 as a CNC aluminium KAOS component. Compared with the standard molded component typically used in this type of RC suspension location, an aluminium carrier is intended as a rigid upgrade component. GASHEAD RC does not assign a specific strength increase, weight reduction, geometry change or handling gain because CEN does not publish quantified engineering data for those claims on the current CKM0303 product page.

COMPATIBILITY

CEN lists CKM0303 for the M-Sport Puma Rally 1. Verify the vehicle model and part number before installation, especially on vehicles using aftermarket hubs, bearings, suspension arms or modified rear suspension components.

INSTALLATION NOTES

• Transfer and install the required bearings, hub hardware and related components according to the vehicle's parts layout.
• Confirm that bearings seat fully and squarely in the carrier.
• After assembly, verify that the hub rotates freely without binding.
• Check suspension movement through its usable range before operating the vehicle.
• Use appropriate thread-locking practices only where required for metal-to-metal threaded fasteners.

PACKAGE CONTENTS

Confirmed by the CEN product designation: left and right rear wheel hub carriers. Additional bearings, hub hardware or suspension components should not be assumed to be included unless specifically shown or supplied by CEN with the packaged product.

MANUFACTURER DATA NOT PUBLISHED

CEN's current CKM0303 listing does not publish the aluminium alloy grade, carrier dimensions, bearing dimensions, individual or total weight, manufacturing tolerances, quantified rigidity increase, torque specifications or a measured performance comparison with the standard carriers. These values are intentionally not estimated or invented.

Manufacturer information reviewed from CEN Racing's official CKM0303 listing. Product specifications and packaging may be revised by the manufacturer without notice.