Breaker / Hammer Accessory for 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator (Blue)

RC4WD BREAKER / HAMMER ACCESSORY FOR 1/14 EARTH DIGGER 360L HYDRAULIC EXCAVATOR – BLUE – VVV-S0244

The RC4WD VVV-S0244 Breaker / Hammer Accessory is a heavy-duty demolition attachment built specifically for the 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator. It replaces the standard digging attachment with a scale breaker assembly that combines stamped-steel structure with a billet-aluminum breaker casing for realistic construction-site and demolition operation.

HEAVY-DUTY STAMPED STEEL + BILLET ALUMINUM

RC4WD specifies heavy-duty stamped steel construction with the breaker housed in a billet-aluminum casing. That material combination gives the attachment the mass and rigidity expected from a functional scale heavy-equipment tool while keeping the breaker body accurately shaped and mechanically robust.

• Manufacturer: RC4WD / JDModels
• Part Number: VVV-S0244
• Scale: 1/14
• Attachment Type: Breaker / hammer
• Color: Blue
• Construction: Heavy-duty stamped steel
• Breaker Casing: Billet aluminum
• Total Weight: 5.07lb / 2.3kg

2.3KG OF WORKING ATTACHMENT MASS

At 2.3kg / 5.07lb, VVV-S0244 is a substantial attachment. That mass is carried at the end of the excavator boom and stick, so it materially affects inertia, machine balance and the load transmitted through the attachment interface. Operate smoothly and avoid using boom momentum as a substitute for the breaker's own working action.

DEMOLITION-STYLE TOOL GEOMETRY

The narrow breaker tip concentrates the working force into a small contact area, unlike a digging bucket that distributes load across a cutting edge. This makes the attachment suitable for scale demolition scenes, compacted material, simulated concrete breaking and construction-site operation where a bucket is not the correct tool.

EARTH DIGGER 360L-SPECIFIC FITMENT

RC4WD lists VVV-S0244 specifically for the 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator (Yellow) – VV-JD00016. It is not advertised as a universal breaker attachment, so custom fitment to another excavator should not be assumed without verifying coupler geometry, pin spacing, boom/stick clearance and control requirements.

QUICK-CONNECT SHOWN IN RC4WD INSTALLATION PHOTOS

RC4WD shows this breaker installed using the Quick Connect for 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator – VVV-S0220. That quick-connect is shown as an application example and is not included with VVV-S0244.

This distinction matters when planning a conversion: the breaker itself is the product sold here. Any required coupler, machine-side hardware or surrounding excavator components must be sourced separately unless explicitly included.

OPERATING LOAD & MACHINE BALANCE

A breaker attachment can create repeated dynamic loads at the tool tip and attachment interface. Keep the excavator positioned securely, avoid excessive side-loading and keep the boom geometry stable during operation. Repeatedly striking at an angle can transfer unnecessary bending load into pins, couplers and linkage instead of keeping the working force aligned with the breaker.

WHAT'S INCLUDED

• 1x Breaker / Hammer Accessory for 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator – Blue

Not included: Earth Digger 360L excavator, VVV-S0220 quick-connect, batteries, radio system or other machine-side accessories shown in manufacturer photography.

INSTALLATION & OPERATING CHECKLIST

• Confirm the excavator model and attachment interface before installation.
• Inspect pins, coupler surfaces and mounting hardware for wear or looseness.
• Verify full boom and stick articulation with the breaker installed before applying load.
• Keep the breaker aligned with the intended working direction; avoid sustained side-loading.
• Do not use the breaker body as a pry bar.
• Keep the machine stable and the tracks fully supported during operation.
• Check the attachment interface after the first operating cycles.
• Stop operation if abnormal looseness, binding or excessive vibration develops.

POWER / CONTROL SPECIFICATION NOTE

RC4WD's current VVV-S0244 product page publishes the construction, weight, fitment and included-content information above, but it does not list a standalone voltage range, current draw or impact-frequency specification for this blue version. GASHEAD RC therefore does not assign unverified electrical or performance figures to VVV-S0244.

WHO THIS ATTACHMENT IS FOR

This accessory is intended for Earth Digger 360L owners who want to expand the machine beyond excavation and into realistic demolition or breaker work. Its 2.3kg mass and metal construction make it a serious scale implement rather than a cosmetic accessory.

GASHEAD RC NOTE: Treat the breaker as working heavy-equipment hardware in miniature. Keep the tool aligned, avoid side-load, inspect the coupler regularly and let the attachment do the work instead of swinging the boom into the material. That approach protects both the breaker and the excavator linkage.