RC4WD 1.9" 5-LUG STEEL WHEELS WITH SILVER BEAUTY RINGS (4) – Z-W0327

SET OF FOUR • CNC-MACHINED BILLET ALUMINUM • STANDARD 12 MM HEX

Give a 1.9-inch scale crawler or trail truck a period-correct 5-lug appearance with polished silver beauty rings and proper metal-wheel presence. RC4WD Z-W0327 is a complete four-wheel set—not a loose hub adapter—and mounts to a standard 12 mm hex on the vehicles listed below.

CLASSIC STYLE, COMPLETE WHEEL SET

The deep face, five visible lug positions and bright beauty ring create the look of a vintage utility or off-road wheel. RC4WD specifies CNC-machined billet aluminum construction, giving each wheel a substantial 80.1 g mass and a durable metal structure for scale trail builds.

• CNC-machined billet aluminum construction
• 1.9-inch wheel class
• Standard 12 mm hex mounting
• Five-lug scale face with silver beauty ring
• Four wheels, four silver center caps and installation tools included

EXACT DIMENSIONS

These measurements are manufacturer specifications. Compare diameter, width, center clearance and positive offset with the current wheel before changing a carefully fitted build.

VEHICLE COMPATIBILITY

• Axial SCX10
• Vaterra Ascender
• Axial Wraith
• HPI Venture FJ Cruiser
• Traxxas TRX-4 only when used with RC4WD 12 mm Wheel Hex Conversion Z-S1844

Compatibility assumes appropriate tire dimensions, axle configuration, body clearance and suspension setup. A model appearing on the list does not eliminate the need to check tire diameter, wheel width, steering clearance and offset on a modified truck.

TIRE SELECTION

RC4WD shows these wheels with Milestar Patagonia M/T 1.9-inch Scale Tires (Z-T0178) as an example. Those tires are not included. RC4WD guarantees fit within its own wheel-and-tire ecosystem; cross-brand bead shapes can differ, so another manufacturer’s 1.9-inch label does not automatically guarantee clean bead capture.

• Inspect both tire beads for molding flash or damage.
• Seat the bead evenly around the full circumference.
• Start all fasteners before final tightening.
• Tighten gradually in a crossing pattern.
• Confirm there is no foam pinching or bead distortion.

ASSEMBLY AND MAINTENANCE

1. Confirm the vehicle uses a suitable 12 mm hex, or install the required RC4WD conversion on a TRX-4.
2. Dry-fit one wheel to verify center-hole and steering-component clearance.
3. Assemble the tire bead evenly before applying final torque.
4. Use the supplied tools on the intended hardware and avoid excessive force on miniature fasteners.
5. Install the wheel and verify full steering and suspension travel.
6. After the first drive, recheck wheel nuts and assembly screws.

Replacement hardware specified by RC4WD includes M3 × 8 mm socket-head cap screws. Optional service tooling includes the RC4WD 4-piece Precision Metric Hex/Nut Driver Set (Z-F0030).

INSTALLED SCALE APPEARANCE

The official installed example shows the wheels on an RC4WD Gelande II RTR with Cruiser body and Milestar Patagonia M/T tires. The photograph demonstrates proportion, offset and period styling; the vehicle and tires are not included.

WHAT IS INCLUDED

• 4 × RC4WD 1.9-inch 5 Lug Steel Wheels with Beauty Ring — Silver
• 4 × silver center caps
• 1 × installation tool
• 1 × miniature scale hex-bolt tool for M2.5 and M3 scale bolts, 2.5 mm hex (Z-S0635)

Not included: tires, foams, vehicle, wheel-hex conversion and other accessories shown in application photographs.

TECHNICAL SUMMARY

GASHEAD RC FITMENT CHECK

Before checkout, verify 12 mm hex compatibility, tire-bead fit, offset and body/steering clearance. TRX-4 owners must account for the required RC4WD Z-S1844 conversion. This is a complete four-wheel set; tires are purchased separately.